To some who may be aware of what VCDS is, there is the feature of "Software Coding", which essentially changes your car's factory configuration to make it think it has certain specifications when it doesn't.
This can be abused to get a "Multi-map" or "Switch-Map". And no, i am not going to gate keep this one.
Here at Banks' ECU Services, we offer to keep a codeblock standard, or modify it to be a different type of map so those who want to run a switchmap without paying switchmap money can do so, you will however be charged at "Custom File" rate if you want 2 modded codeblocks if you decide to run something other than standard in the unedited codeblock.
ECO + Stage 1: £70
Stage 1 + Stage 1 Options: £80
Custom + Any other map: £100
Now the downsides is that you need a VCDS cable and a laptop and you NEED to be comfortable with soft coding, however if you are local to me, i can do it for you.
Enough yap lets just get into it.
IMPORTANT: READ BEFORE CONTINUING
Not every EDC15 ECU is configured identically.
Depending on your engine and ECU software, the available coding values and calibration arrangements may differ.
DO NOT blindly copy coding values from another vehicle.
Always record your original software coding before making any changes.
If the ECU displays unexpected faults, behaves abnormally, or fails to operate as expected, restore the original coding and investigate before continuing.
I accept no responsibility for damage or faults resulting from incorrect coding or unsupported configurations. You should only use this guide at your own risk.
MORE INFO:
CODEBLOCK NUMBERING – WHAT TO EXPECT
From my experience working with EDC15 files, the available codeblocks tend to follow a fairly predictable pattern, although this is not universal.
Transverse Applications (T):
Codeblocks 1–3 are commonly encountered.
Some ECU software only contains codeblocks 1–2.
Longitudinal Applications (L):
Passat and Superb applications commonly use codeblocks 1 and 5.
Codeblock 4 is generally associated with quattro/4Motion AND automatic transmission configurations, depending on the ECU software.
These are observations from the files I've worked with, NOT guaranteed configurations for every ECU.
Always inspect your own ECU software before making changes.
Step 1: Connect your VCDS Cable
Step 2: Load VCDS and enter Select Module Control -> 01-Engine -> Login - 11
Step 3: Enter the Code 12233 when asking for a login, and press "Do It!"
Step 4: Load Up Coding/Recode - 07
Step 5: FIND OUT HOW MANY CODEBLOCKS YOU HAVE AND HOW THEY ARE REFERRED TO IN YOUR ECU!
Step 5.5: RECORD YOUR ORIGINAL CODING! If something goes wrong, you'll need this to restore the ECU to its original configuration. Take a screenshot if necessary. Don't rely on your memory.
Step 6: Change the coding from 0000X to 0000Y - X and Y refer to any number from 1 to 5, which is dependant on the ECU, refer to your codeblocks numbering scheme. You may only be able to use 1+2, or 1+3, or 1+5 for example depending on your ECU Software.
Step 7: Press "DO IT!".
Step 8: Close VCDS and pull the key out of the ignition for a minimum of 10 seconds.
Step 9: Open VCDS AGAIN, and Verify the Software Coding has been successful.
Step 10: Start the car and test if the car is actually different (Log Live data to verify Before and AFTER.)
ADDITION:
If any errors occur, please contact me with any ECU error codes you have (if any.)
If any errors occur, first restore your original software coding if you can. Then repeat Steps 7–10 and check whether the faults have cleared. If they persist, stop and investigate rather than repeatedly changing coding values.